CONDUCTOR: Class B stranded, bare, soft copper • INSULATION: Cross-Linked Polyethylene (XLP) as approved by CSA on Types RW90 XLP -40°C per CSA C22.2, No. 131; LL90458, color code: 2/C black, white; 3/C red, black, blue; 4/C red, black, blue, white; more than 4/C numbered • GROUNDING CONDUCTOR: An uninsulated Class B stranded grounding conductor is included in the cable assembly • ASSEMBLY: Multiple conductor cables are assembled with suitable fillers and binder tape • INNER JACKET: Polyvinyl Chloride (PVC) heat, flame and moisture-resistant jacket, rated -40°C • ARMOR: Aluminum interlocking armor • OVERALL JACKET: Polyvinyl Chloride (PVC) heat, flame and moisture-resistant jacket, rated -40°C, the standard color is black but colored jackets will be provided on request meets Flame Test in accordance with Ontario Hydro Spec. L-891 SM-77, meets Flame Test in IEEE 383 and FT-4 or better. Sunlight Resistant. • AMPACITY: Based on not more than three conductors in raceway or cable at an ambient temperature of 30°C per Table 2, Column 4 of the Canadian Electrical Code, these ampacities are also based on a minimum one cable O.D. spacing between adjacent cables, (for a four conductor cable the fourth conductor is considered to be the neutral of a three-phase, 4-wire-system) • TEMPERATURE: -40°C to 90°C • VOLTAGE: 1000 V